Product Name: PFS Product Description: PFS (PFS) is a new, non-toxic, highly efficient inorganic polymer flocculants at home and abroad to promote the application. Widely used in industrial water, drinking water, and when the city sewage, paper, printing, machinery manufacturing and food processing industrial wastewater treatment. Features: (1) PFS of treated water requiring wide pH range, pH values ??can be in the 4-11 range. (2) PFS flocculation than ferrous sulfate, aluminum sulfate, ferric chloride, aluminum chloride and basic aluminum chloride. (3) PFS has a good deodorant sludge dewatering performance and functionality. (4) PFS closely settled sludge, filter performance, reduce the burden on sludge treatment is superior to aluminum series flocculant. (5) PFS product non-toxic, good stability after dilution, can quickly miscible with water in any proportion. (6) PFS is available on a variety of water treatment facilities use, rapid floc formation, if the organic polymer flocculant synergy is able to achieve even better results. (7) PFS for wastewater sulfide and metal ions, radioactive removal rate is far superior to aluminum series flocculant. For suspended solids, COD, BOD removal rate is also higher than the traditional flocculant. (8) PFS no chlorine ions, it is not the base, aluminum trichloride and ferric chloride for water treatment facilities, as serious corrosion. Product Specifications: Item Index total iron content% ≥ 19 reducing substances (to Fe2 +) content ≤ 0.10 Basicity% 42 PH (1% water soluble) 2.0-3.0 insoluble matter% ≤ 0.3 Main purpose and scope: aggregation ferric sulfate is widely used in industrial wastewater and municipal sewage purification towns drinking water, industrial water recycling, chemical, petroleum, mining, paper, printing and dyeing, brewing, steel, coal gas, electroplating and other industries. Usage: 1, for the water plant, industrial water station when using the methods, techniques and basic chloride and other conventional flocculants identical. 2, for sewage treatment, for use with a low concentration of sewage; former high concentrations of sewage treatment dosage should be adjusted to PH value between 4-11, re-dosing. Available after dosing lime (5-10%) as a coagulant, PH 8-9 alignment between the best available treatment effect. 3, poly dosing liquid iron can also be diluted to the working fluid (approximately 3-fold diluted concentrations, can not be too thin) dosing, convenient operation mainly depending on the measure may be, by the stir cast about, you can mix both. 4, the amount of poly-iron water due to the different nature of the treated effluent requirements vary, the optimum dose should be determined according to the experiment. Packing and storage: 1, plastic woven, standard package. Weight: 25kg. 2, stored in a cool dry place.